McIntosh MA352 2-Channel Hybrid Integrated Amplifier

Did you check out the feature-packed McIntosh MA352 2-Channel Hybrid Integrated Amplifier? It's now available on Ooberpad. The MA352 Integrated Amplifier is a hybrid design that brings down the high-quality vacuum tube and solid state audio design principles. The final outcome is an eye-catching amplifier that enjoys the best of these two opposing audio philosophies all while reproducing music at the highest quality level. An all analog design, the MA352 has a vacuum tube preamplifier section that is powered by a pair of 12AX7A and a pair of 12AT7 vacuum tubes; its output stage is a direct coupled solid state amplifier that outputs 200 Watts per channel into 8 Ohm speakers or 320 Watts per channel into 4 Ohm speakers – ample power to aptly drive virtually any set of loudspeakers. Dual scale blue Watt meters render an accurate readout of power output for both speaker impedances.

Warranty

3-year manufacturer's warranty

Key Features:

• Hybrid design: vacuum tube preamp and solid state power amp
• 200 Watts into 8 Ohms
• 320 Watts into 4 Ohms
• 5-band tone control

Benefits of McIntosh MA352 2-Channel Hybrid Integrated Amplifier:

Exceptional accuracy and clarity

The MA352 has 2 balanced and 3 unbalanced inputs plus 1 Moving Magnet phono input with adjustable loading for connecting a turntable. It has gold-plated speaker binding posts to help prevent corrosion and ensure a quality signal is sent over your speaker cables to your speakers. A stereo preamplifier output is available for connecting a higher-powered amplifier; it can also be used to connect 1 or 2 powered subwoofers for added low frequency performance.

Packed with versatile features

The MA352 is packed with numerous McIntosh technologies including:

• Patented Power Guard^® technology that monitors the output signal for over driving and makes real time micro adjustments to the input signal to prevent harsh sounding clipping that could potentially damage your speakers
• Fuse-less short-circuit protection circuit Sentry Monitor^™ that will disengage the output stage before current exceeds safe operating levels and then resets automatically when operating conditions return to normal
• McIntosh Monogrammed Heatsinks^™ which are connected to advanced high current output transistors that minimize thermal equilibrium lag (or warm-up) time
• High Drive headphone amplifier with Headphone Crossfeed Director (HXD^®)
• A 5-band analog tone control allows for manual adjustment of your favorite recordings (each band adjustable by ± 12dB)
• Home Theater Pass Through lets it be seamlessly integrated into a home theater system
• Power Control to send power on/off signals to connected McIntosh components for easy system power up and shutdown
• Data Ports to send remote control commands to connected source components

Classic design

The unit sits on a stainless steel chassis polished to a mirror finish; vintage McIntosh-styled die cast aluminum name badges are affixed to each side. Blue output meters, control knobs, an illuminated logo, and a black glass front panel with direct LED backlighting complete the unit. It can be paired with an assortment of CD players, turntables, tuners, media streamers and speakers to complete your home audio system.

Where to buy?
Buy the McIntosh MA352 2-Channel Hybrid Integrated Amplifier online at the best price in Mumbai, Delhi, Bangalore, Chennai and all across India. Enjoy expert, prompt and courteous customer service from the Ooberpad team. We will help you choose better and give you all the support you need to take the right buying decision in India.

Technical Specifications of McIntosh MA352 2-Channel Hybrid Integrated Amplifier:

Brand & Model #	McIntosh MA352
Power Output per Channel	200 Watts into 8 Ohms 320 Watts into 4 Ohms
Number of Channels	2
Speaker Impedance	4 or 8 Ohms
Rated Power Band	20Hz to 20kHz
Total Harmonic Distortion	0.03%
Dynamic Headroom	1.5dB
Frequency Response	Frequency Response +0,-0.5dB 20Hz to 20kHz Frequency Response, +0, -3dB 10Hz to 100kHz
Sensitivity	Sensitivity Phono (Moving Coil) N/A Sensitivity Phono (Moving Magnet) 2.5mV Sensitivity High Level (Balanced / Unbalanced) 0.5V/0.25V Sensitivity (Power Amp input) N/A
Signal to Noise Ratio	Signal To Noise Ratio (Moving Coil) N/A Signal To Noise Ratio (Moving Magnet) 82dB Signal To Noise Ratio (High Level) 93dB Signal To Noise Ratio (Power Amp input) N/A
Input Impedance	20K/20K
Damping Factor	8 Ohms: >200 4 Ohms: >100
Maximum Output (Balanced / Unbalanced)	8V Unbalanced
Connectivity	Balanced Input: 2 Unbalanced Input: 3 Phono Input Moving Coil: 0 Phono Input Moving Magnet: 1 (adjustable loading) Upgradeable Digital Audio Module: No Digital Coaxial Input: 0 Digital Optical Input: 0 Digital MCT (DIN) Input: 0 Digital USB Input: 0 HDMI (ARC) Input: 0 Balanced Variable Output: 0 Unbalanced Fixed Output: 0 Unbalanced Variable Output: 1 Headphone Output: 1/4" High Drive with Headphone Crossfeed Director (HXD®) Subwoofer Output: 2 AM/FM Tuner option: No Home Theater PassThru: Yes Unbalanced Analog Connector Type: Standard Speaker Binding Post Type: Standard Service Port: 1
Digital Audio Specification	Digital-to-Analog Converter (DAC) Type: N/A Digital Coaxial Input Sample Rate: N/A Digital Optical Input Sample Rate: N/A Digital MCT (DIN) Input Sample Rate: N/A Digital USB Input Sample Rate: N/A
Control	Tone Controls: 5-Band Tone Bypass and Input Assign: Yes RS232 Control Input: Yes Power Control Output: 1 Rear Panel Data Port: 2 Rear Panel IR Sensor Input: Yes Input Level Match: Yes
General Specifications	Vacuum Tube or Solid State: Preamplifier: Vacuum Tube Power Amplifier: Solid State Output Type: Direct Coupled Output Meters: Yes Dual Layer Chassis: Yes Chassis Finish: Polished stainless steel McIntosh Monogrammed Heatsinks™: Yes Power Requirement: 120V 50/60Hz, 6.0A Standby Power Requirement: <0.5 Watts
Weight & Dimensions	Unit Dimensions (W x H x D): 17-1/2" (44.5cm) x 9-7/8" (25.1cm) x 17-7/16" (44.3cm) Unit Weight: 66 lbs (29.9 kg)

Exceptional accuracy and clarity The MA352 has 2 balanced and 3 unbalanced inputs plus 1 Moving Magnet phono input with adjustable loading for connecting a turntable. It has gold-plated speaker binding posts to help prevent corrosion and ensure a quality signal is sent over your speaker cables to your speakers. A stereo preamplifier output is available for connecting a higher-powered amplifier; it can also be used to connect 1 or 2 powered subwoofers for added low frequency performance. Packed with versatile features The MA352 is packed with numerous McIntosh technologies including: Patented Power Guard ® technology that monitors the output signal for over driving and makes real time micro adjustments to the input signal to prevent harsh sounding clipping that could potentially damage your speakers Fuse-less short-circuit protection circuit Sentry Monitor ™ that will disengage the output stage before current exceeds safe operating levels and then resets automatically when operating conditions return to normal McIntosh Monogrammed Heatsinks ™ which are connected to advanced high current output transistors that minimize thermal equilibrium lag (or warm-up) time High Drive headphone amplifier with Headphone Crossfeed Director (HXD ® ) A 5-band analog tone control allows for manual adjustment of your favorite recordings (each band adjustable by ± 12dB) Home Theater Pass Through lets it be seamlessly integrated into a home theater system Power Control to send power on/off signals to connected McIntosh components for easy system power up and shutdown Data Ports to send remote control commands to connected source components Classic design The unit sits on a stainless steel chassis polished to a mirror finish; vintage McIntosh-styled die cast aluminum name badges are affixed to each side. Blue output meters, control knobs, an illuminated logo, and a black glass front panel with direct LED backlighting complete the unit. It can be paired with an assortment of CD players, tur