ART CX311 2way Crossover with Subwoofer Out

ART CX311 2way Crossover with Subwoofer Out Overview:

The CX311 two-way stereo crossover network has an additional subwoofer output for low-end frequency reinforcement. It employs 24dB/octave state-variable, Fourth-order Linkwitz-Riley filters that guarantee properly phased outputs at all frequencies which is optimal for the proper acoustic summing of common signals from adjacent drivers in the crossover region.

Each channel features independent high and low output level controls and a crossover frequency rotary control which covers a wide range (250hz to 6khz). All three outputs have a 30 cycle low cut switch to eliminate low-end rumble. The subwoofer features an independent output level and rotary control for frequencies in the 50hz to 250hz range.

Features:

• Stereo two-way crossover
• Subwoofer output
• Fourth-order Linkwitz-Riley filters (24dB / octave state-variable)
• Independent high and low output level controls
• Crossover frequency rotary control (250hz to 6khz)
• 30 cycle low cut switch
• Independent output level and rotary control (50hz to 250hz)

Specifications:

• Dimensions: 1.75”H x 19”W x 5.5”D
• Weight: 4.85 lbs. (2.2 kg)
• Input Connections: XLR, ¼” TRS, balanced
• Output Connections: ¼”TS, unbalanced
• Input Impedance: 100K ohms
• Output Impedance: 220 ohms
• Maximum Input Level: +21dBu
• Maximum Output Level: +21dBu
• CMRR: >75dB (typical @ 1kHz)
• Frequency Response: 10Hz to 40kHz, +/-.5dB
• Signal to Noise Ratio: >95dB, Ref: 0dBu ; 20Hz to 20kHz, unweighted
• Dynamic Range: >114dB
• Total Harmonic Distortion: <0.01% (20Hz-20kHz,0dBu)
• Crossover Filter Type: Fourth-order Linkwitz-Riley, 24dB/octave, state-variable
• Crossover Frequency Range: 250Hz to 6kHz
• Subwoofer Filter Type: Two-pole Butterworth, 12dB/ octave
• Subwoofer Frequency Range: 50Hz to 250Hz