BEVINSEE LED Auxiliary Lights Driving Spot Light 3600 Lumen 6500K

BEVINSEE LED Auxiliary Lights — Compact yet powerful · Bright and reliable · All-weather lighting

Features:

• 【Enhanced Visibility】Provides extra illumination in fog, darkness, or harsh weather, improving road visibility.
  
• 【Optimized Lighting】Precise beam distribution enhances nighttime riding safety.
  
• 【Dual-Source High Brightness Design】Dual light coaxial structure illuminates the same area simultaneously.
  
•  Single light brightness: approx. 3100 lumens
  
•  Dual light brightness: approx. 3600 lumens
  
•  Please Note: Dual light ≠ High/Low beam switching. This product does not support high/low beam functionality.

Integrated Focused + Diffused Beam Pattern
The integrated optical design balances long-range focused illumination with close-range diffused coverage.
Enhances overall visibility during night-time off-road driving without the need to switch between high and low beams.

LED Light Specifications: (Single)

• Brand: BEVINSEE
  
• Power: 40W / 50W
  
• Luminous flux: 3100 / 3600 Lumen
  
• Colour temperature: 6000K / 6500K (close to natural light)
  
• Chip: High-quality LED chip, stable output
  
• Housing Material: Powder-coated Cast Aluminium
  
• Waterproof Rating: IP67
  
• Operating Voltage: 10-30V DC
  
• Lifespan: Approx. 50,000 Hours
  
• Certification: ECE R10
  
• Size: See Detailed Diagram

Suitable Applications: Motorcycle/car auxiliary lighting, off-road adventures, camping, construction work, emergency rescue, etc.

Package Included: (See Pictures for Details)
2X Square LED lights
1X Complete wiring harness Kit (including fuse and switch interface)
Installation accessories: brackets, screws, washers, etc.

Installation Guide
Switch Mounting Options (2 positions available; see installation diagram for details)
1.Mounting beneath the clutch bracket: Secure to the bolt position beneath the clutch bracket.
2.Mounting on the rear-view mirror bracket: Secure to the rear-view mirror bracket.

Switch Functions:
Press to Switch: Single Light → Dual Light → Off
Flash Mode: Flashing → Left/Right Flashing

Wiring Instructions:
Power Positive (Red Wire)
Power Negative (Black Wire)
ACC Wire (Red Wire)

Choose Mounting Location – It is recommended to install on the front of the bike or the front bumper, avoiding direct beam exposure to oncoming vehicles.
Secure the Lights – Use the included brackets and screws to fix the lights in place.
Connect the Wiring Harness – Plug into the motorcycle battery; the harness comes with a fuse and switch interface, no need to modify the original wiring.
Adjust Light Angle – Ensure the beam covers the desired road area.
Function Test – Check that both lights turn on correctly and are aimed properly.

Tips & Warnings:
Some regions may restrict road use; follow local regulations.
Make sure wires are securely fastened to prevent loosening or abrasion while riding.
If the installation location is unusual or you are unfamiliar with electrical work, it is recommended to seek assistance from a professional technician.

Disclaimer:

Bevinsee parts are not sponsored or endorsed by, or affiliated with the brands its parts fit, including Porsche, Subaru, Jaguar, BMW, Isuzu, Chrysler, Dodge, Jeep, Buick, Cadillac, Chevrolet, GMC, Volvo, Land Rover, Oldsmobile, Pontiac, Ford, Lincoln, Mercury, Acura, KIA, Nissan, Infiniti, International Harvester, Mitsubishi, Audi, Lexus, Toyota, Mazda, Volkswagen, Suzuki, Saab, Honda, Alfa Romeo, Saleen, Mercedes-Benz, Nash, Hummer, Freightliner, Datsun, Saturn, Turner, Geo, Lada, Fiat, Daihatsu, Opel, Vauxhall, Sabra, Tesla, Ram, Rover, Skoda, Healey, Mini, Smart, Scion, Renault, Seat, Peugeot, Merkur, Astra, Tucker, VW, Routan, Tiguan, Touareg, Jetta, Gti, Passat, Golf, Bosch, Denso, Holden, Chery, Mercedes Benz, Holden Special Vehicles, Hyundai, Trabant, Citroën, Freightline, etc.

Motorcycle/car auxiliary lighting, off-road adventures, camping, construction work, emergency rescue, etc. Package Included: (See Pictures for Details) 2X Square LED lights 1X Complete wiring harness Kit (including fuse and switch interface) Installation accessories: brackets, screws, washers, etc. Installation Guide Switch Mounting Options (2 positions available; see installation diagram for details) 1.Mounting beneath the clutch bracket: Secure to the bolt position beneath the clutch bracket. 2.Mounting on the rear-view mirror bracket: Secure to the rear-view mirror bracket. Switch Functions: Press to Switch: Single Light → Dual Light → Off Flash Mode: Flashing → Left/Right Flashing Wiring Instructions: Power Positive (Red Wire) Power Negative (Black Wire) ACC Wire (Red Wire) Choose Mounting Location – It is recommended to install on the front of the bike or the front bumper, avoiding direct beam exposure to oncoming vehicles. Secure the Lights – Use the included brackets and screws to fix the lights in place. Connect the Wiring Harness – Plug into the motorcycle battery; the harness comes with a fuse and switch interface, no need to modify the original wiring. Adjust Light Angle – Ensure the beam covers the desired road area. Function Test – Check that both lights turn on correctly and are aimed properly.