Sontronics DM-1S 30Hz to 20Khz Condenser Snare Drumkit Microphone - Cardoid

Sontronics DM-1S Condenser Snare Drumkit Microphone - Cardoid

SONTRONICS DM-1S condenser mic for snare
and SONTRONICS DM-1T condenser mic for tom tom
Representing three years of research, design and development alongside professional drummers and producers, the Sontronics DM-1S and DM-1T have been specifically created to capture all the characteristics of your snare and tom tom respectively.

Together with our DM-1B condenser mic for kick drum, the DM-1S and DM-1T give you everything you need to get exceptional results from your drumkit or individual drums, both live and in the studio.

The DM-1S and DM-1T are small-diaphragm condenser mics, each with a -10dB attenuation pad and each capable of capturing up to an impressive 135db SPL.

They are designed to capture all the classic characteristics of your drum - the snap, crack and rattle of your snare and the slap, boom and resonance of your tom tom. The two microphones have slightly different frequency response and capture to get exceptional results, both live and in the studio..

Both mics are supplied with a mic clip to allow you to quickly get set up and position your mic wherever you need it, either on a mic stand or an additional rim mount.

The DM-1S is ideal for kit snare and orchestral snare drum, but users have told us that they also give incredible results on cajón, djembe and doumbek. Similarly, while DM-1T is designed for rack and floor toms, it also gives a brilliant sound on your bongos, djembe, tabla and congas

DM1S Features :

• Cardioid condenser mic
• Designed specifically for snare drum and tom tom
• Also great for other percussion
• Supplied with mic clip

Recommended for

• DM-1S: snare drum (plus cajón, djembe and doumbek)

DM-1S SPECIFICATIONS

• Polar pattern: Cardioid
• Pad: 0dB, -10dB
• Frequency response: 30Hz - 20kHz
• Sensitivity: 8mV/Pa -42dB ±2dB
• (0dB = 1V/Pa @ 1,000Hz)
• Impedance: ≤200 Ohms
• Equivalent noise level: 14dB
• (A-weighted)
• Max. SPL (for 0.5% THD @ 1,000Hz):
• 135dB (with -10dB pad switched in)
• Power: Phantom power 48V required
• Connector: 3-pin XLR
• Dimensions: 95 x 22 x 22mm
• Weight: 90g
• Comes with: mic clip