Tascam US 2x2 Trackpack 2-in-2-out USB Audio Interface Recording Package

Tascam US 2x2 Trackpack 2-in-2-out USB Audio Interface Recording Package Overview:

A Complete Recording Bundle – Everything You Need To Begin Recording
The new TASCAM TRACKPACK 2x2 assembles everything you need to record music on your computer. Included in the complete recording bundle is TASCAM’s US-2x2 USB audio interface, TM-80 studio condenser microphone with shockmount, and TH-02 headphones, plus Cakewalk SONAR X3 LE and Ableton Live Lite 9 DAW software.

The US-2x2 is a 2-in/2-out USB interface, bus powered from your Mac or Windows computer. A pair of Ultra-HDDA mic preamps provide up to 57dB of gain and the best noise and distortion specs in their class. The audio design features high-performance, musical components like NE5532 op amps for rich sound quality without coloring the source. Class-compliant drivers enable use with tablets like the iPad when using an optional power supply.

The US-2x2’s all-aluminum case features a pair of “bio-cell” side panels. In addition to their striking design, the side panels ergonomically angle the interface towards you to make the switches and knobs easier to read on a desktop. The US-2x2 includes MIDI in and out, balanced audio outputs, a headphone amp, and two DAW applications to choose from – both Cakewalk SONAR X3 LE and Abelton Live Lite 9. Included with the software are dozens of plug-in instruments, effects, and loops to get you started.

Also included is the TM-80, a condenser microphone ideal for vocals, drums, and acoustic instruments. The TM-80 includes a shockmount and desktop stand. The TH-02 closed-back headphones provide isolation while recording and a great reference during mixdown.

TH-02 Stereo Headphones
Compact, Folding Headphones for Easy Transport and Storage
The TM-80 ear cups can be rotated 90 degrees and folded-up completely into the headband for easy storage. Once folded away, they can be easily carried around while on the go for recording outside the studio.

Comfortable and Easy-to-Wear Closed Headphones for Studio Monitoring
The closed cdesign of the headphones is ideal for monitoring performances while recording without mic bleed. Encorporating comfortable, sound-proof ear pads, there’s no need to worry about the mic picking up sound bleed from the headphones. With a wide frequency response of 18Hz to 22kHz, you can also use these headphones for monitoring during mixdown for clear, uncolored sound.

TM-80 Condenser Mic
Cadioid Condenser Microphone for a Pro Vocal Sound
A cardioid condenser mic is the perfect all-around mic for vocal and instrument recording, and the unidirectional pickup pattern keeps the recording from sounding too ambient. The TM-80 has an 18mm aluminum diaphragm and a wide frequency response. With a maximum sound pressure rating of 136dB SPL, you can safely use the TM-80 with guitar amps, drums and other loud instruments.

Package includes shock-absorbing suspension, table-top mic stand and mic cable
Included are essential microphone accessories - a shock-absorbing suspension to reduce bass rumble, 6-foot mic cable and table-top mic stand - allowing you to set up at your desktop and record right away.

Features:
US-2x2 USB Audio/MIDI Interface

• Ultra-HDDA (High Definition Discrete Architecture) mic preamps with −125dBu EIN
• NE5532 op-amps used in the audio input and output stages
• Up to 96kHz/24-bit recording
• Support for Windows and Macintosh
• USB 2.0 computer connection
• Connect with iPads and other iOS devices
• +48V phantom power for all inputs
• High-impedance inputs available
• Input level specifications boast a range of 57dB – ideal for using dynamic mics
• Direct monitoring function for zero-latency monitoring
• Tough all-metal casing for durability
• Angled design provides excellent usability on a desktop
• Balanced analog TRS output jacks suitable for connection to powered monitors
• Standard TRS headphones output jack
• Separate controls for line output & headphone output levels
• MIDI input and output
• Output sources can be selected in the setting panel
• Input sound monitoring can be set to stereo or mono
• Input muting function eliminates noise from unused inputs
• USB class compliant 2.0 support
• License cards included for SONAR X3 LE/Ableton Live Lite9
• Confirmed operation with major DAW software (SONAR, ProTools, Cubase, Live, Studio One, Garage Band)
• Dimension (W×H×D)：186mm×65mm×160mm / 7.3" × 2.6" × 6.3"
• Weight:1,100g / 2.4 l\n
• Weight:1,100g / 2.4 ln
\n
• Weight:1,100g / 2.4 lb
n

nTH-02 Stereo Monitor Headphones
n

n
• Foldable design for compact storage and transport
n
• Tightly-stitched, padded headband and ear pads for stylish comfort
n
• Closed-back dynamic design featuring rich bass response and crisp highs
n
• Snap-on 1/8" (3.5mm) to 1/4" (6.3mm) adapter
n
• Driver diameter: 50mm
n
• Impedance: 32 Ohms
n
• Sensitivity: 98 dB +/- 3dB
n
• Frequency response: 18 Hz to 22 kHz
n
• Max input power: 600 mW
n
• Cable length: 9.8ft (3m) when fully extended
n
• Dimension (W×H×D) : 180mm×240mm×90mm / 7.1 inch×9.5 inch×3.5 inch
n
• Weight : 298g / 0.7 lb
n

nTM-80 Condenser Microphone
n

n
• Condenser microphone utilizes precisely designed electronic circuitry.
n
• Microphone capsule assembly features an 18mm pure aluminum diaphragm
n
• Cardioid polar pattern
n
• Frequency response: 20Hz to 20kHz
n
• Sensitivity : -38dB +/-2dB (0dB=1V/Pa at 1kHz)
n
• Phantom power requirement: 9 - 48V DC
n
• Output impedance : 200ohm +/-30% (at 1kHz)
n
• Load impedance : >1k ohm
n
• Max SPL : 136dB (at 1kHz=1% THD)
n
• S/N ratio : 77dB
n
• Housing : Die cast zinc
n
• Dimensions (W×H×D) : 48mm×165mm×48mm / 1.9 inch×6.5 inch×1.9 inch
n
• Includes : shock mount, mini desk stand, mic cable (1.8m XLRM – XLRF)
n

nSpecifications:
US-2x2
n

n
• Sampling frequency: 44.1k/48k/88.2k/96kHz
n
• Quantization bit rate: 16/24bit
n
• Analog audio inputs 
n
• MIC IN: IN 1-2
n
• Connector: XLR-3-31(1:GND, 2:HOT, 3:COLD), BALANCED
n
• Input impedance: 2.2k ohms
n
• Nominal input level 
n
• GAIN:MAX: -65dBu (0.0004Vrms)
n
• GAIN:MIN: -8dBu (0.3090Vrms)
n
• Maximum input level (GAIN:MIN ): +8dBu (1.9467Vrms)
n
• Gain: 57dB
n
• INST IN: IN 1-2
n
• Connector: 6.3mm(1/4")TS-jack(T：HOT, S：GND), UNBALANCED
• (When set to "INST" at MIC/LINE.INST switch)
• Input impedance: 1M ohms
• Nominal input level 
• GAIN:MAX: -63dBV(0.0007Vrms)
• GAIN:MIN: -6dBV(0.5015Vrms)
• Maximum input level (GAIN:MIN ): +10dBV(3.162Vrms)
• Gain: 57dB
• LINE IN: IN 1-2
• Connector: 6.3mm(1/4")TRS-jack(T：HOT, R：COLD, S：GND), BALANCED
n
• (When set to "MIC/LINE" at MIC/LINE.INST switch)
n
• Input impedance: 10k ohms
n
• Nominal input level 
n
• GAIN:MAX: -53dBu(0.0017Vrms)
n
• GAIN:MIN: +4dBu(1.228Vrms)
n
• Maximum input level (GAIN:MIN ): +20dBu(7.75Vrms)
n
• Gain: 57dB
n
• Analog audio outputs 
n
• LINE OUT 
n
• Connector: 6.3mm(1/4")TRS-jack(T：HOT, R：COLD, S：GND), BALANCED
• Output impedance: 110ohms
• Nominal output level: +4dBu (1.273Vrms)
• Maximum output level: +20dBu (7.75Vrms)
• PHONES 
• Connector: 6.3mm(1/4") stereo phone jack
n
• Maximum output level: 18mW+18mW or more (THD+N 0.1% or less, 32ohms loaded)
n
• MIDI IN / OUT 
n
• Connector: Din 5-pin
n
• Format: Standard MIDI format
n
• USB 
n
• Connector: USB B type 4-pin
n
• Format: USB2.0 HIGH SPEED
n
• Power 
n
• When connected PC: USB bus powered
n
• When connected iOS: AC Adapter (TASCAM PS-P520, sold separately)
n
• Power consumption: 2.5W
n
• Dimensions: 7.32" W ×2.56" H ×6.3" D (186mm W x 65mm H x 160mm D)
• Weight: 2.43lb (1.1kg)
• Operating temperature: 5 to 35˚C
• Bundled software: Cakewalk SONAR X3 LE, Ableton Live 9 Lite
• Accessories: USB cable, SONAR X3 LE license card, Live 9 Lite license card, User's manual
• Audio performance
• Frequency response 
• LINE OUT(BALANCED) 
• 44.1k/48k Hz: 20Hz to 20kHz, +0dB/-0.1dB
• 88.2k/96k Hz: 20Hz to 40kHz, +0dB/-0.2dB
• PHONES 
• 44.1k/48k Hz: 20Hz to 20kHz, +0dB/-0.5dB
• 88.2k/96k Hz: 20Hz to 40kHz, +0dB/-2dB
• THD: 0.003% or less
• S/N ratio: 101dB or more
• Crosstalk: 95dB or more
• EIN: -127dBu or less
• Computer system requirements
• Windows:
• OS: Windows 7(32-bit SP1, 64-bit SP1), Windows 8.0(32-bit, 64-bit), Windows 8.1(32-bit, 64-bit)
• Compatible computers: Windows-compatible computer with a USB 2.0 port
• CPU type/speed: Dual core/2 GHz or faster (x86)
• Memory: 2GB or more
• DRIVER: ASIO2.0, WDM(MME)
• Macintosh
• OS: OS X Mountain Lion(10.8), OS X Mavericks(10.9) 
• Compatible computers: Apple Macintosh computer with a USB 2.0 port
• CPU type/speed: Dual core/2 GHz or faster
• Memory: 2GB or more
• DRIVER: Core Audio, Core MIDI
• iOS
• OS: iOS 7

TH-02

• Design: Closed-back dynamic
• Frequency response: 18Hz - 22,000Hz
• Driver diameter: 50mm
• Sensitivity: 98dB (+/-3dB)
• Input impedance: 32ohms
• Max input power: 600mW
• Cable: 9.8ft (3m) when fully extended
• Plug: 3.5mm(1/8") stereo mini plug, 6.3mm(1/4") stereo phone plug adapter
• Dimensions: 180 (W) × 240 (H) × 90 (D) mm (7.1 (W) × 9.5 (H) × 3.5 (D) inch)
• Weight: 298g / 0.7lb (With cable)

TM-80

• Transducer type: Condenser
• Polar pattern: Cardioid
• Frequency response: 20 - 20,000 Hz
• Output impedance: 200ohm +/-30% (at 1kHz)
• Load impedance: >1k ohm
• Sensitivity: -38dB +/-2dB (0dB=1V/Pa at 1kHz)
• Max SPL 136dB: (at 1kHz=1% THD)
• S/N ratio: 77 dB
• Output Connector: 3-pin XLR male
• Phantom Power Requirements: 9 - 48VDC phantom power
• Dimensions: 48(W) × 165 (H) × 48 (D) mm (1.9 (W) × 6.5 (H) × 1.9 (D) inch)
• Weight: 300g / 0.7 lb
• Includes: shock mount, mini desk stand, mic cable (1.8m XLRM – XLRF)

Made in China