Hard Water Stain Remover: Krud Kutter Rust, Lime & Calcium Stain Remover

It is very challenging to clean hard water stains from kitchen, bathroom, garage etc. You need a quality cleaning chemical that marks up to your expectations. Thus, Truworth brings a quality hard water stain remover called ‘Krud Kutter Rust, Lime & Calcium Stain Remover from US. Apart from cleaning tough water stains, it also removes rust, lime, and calcium stains. You can use this for showers, showerheads, sinks, glass, wood decks, stone, toilets, porcelain, brick, steel siding, and more. It is fast, safe and effective to be used for interior and exterior surfaces.

NOTE: It is not allowed to send this item through air mode. Surface mode is enabled for the same. Thus, shipping will be done through surface.

Features of Krud Kutter Hard Water Stain Remover

• Also removes rust, lime, and calcium stains.
• Works on various surfaces including wood and porcelain.
• Fast, safe, and effective.
• Certified by Rust-Oleum.

Follow the directions from TDS or label printed on bottle for best results.

Important Directions to Use Krud Kutter Hard Water Stain Remover

It is good test first before using. Thus, do a test first by treating an inconspicuous area. Prevent to dry the chemical on surface. Eyes protection and household gloves are highly recommended at the time of using.

Showers, Sinks, and Tubs: Pour the chemical onto a clean dry cloth or non-abrasive sponge and apply to the stains. Rise instantly with cold water and repeat the process if you feel necessary.

Toilet Bowels: Flush toilet to remove water and add 6 ounces of product. Scrub with a bristled brush until clean and flush toilet. Repeat if necessary.

Deck: Apply product with a scrub brush or mop. Saturate the surface and let it sit until the wood achieves the desired lightness. Rinse the surface thoroughly with water and allow it to dry.

Exterior Surface: For heavy stains apply product full strength. For medium-light stains, mix equal parts of product with water (50/50). Apply directly onto the surface an allow it to sit briefly. Rub lightly with a sponge or brush until the stains are gone. Rinse with water. Heavy stains may require an additional application.

NOTE: Keep out from the reach of children.

Specification of Krud Kutter Rust, Lime & Calcium Stain Remover

It is good test first before using. Thus, do a test first by treating an inconspicuous area. Prevent to dry the chemical on surface. Eyes protection and household gloves are highly recommended at the time of using. Showers, Sinks, and Tubs : Pour the chemical onto a clean dry cloth or non-abrasive sponge and apply to the stains. Rise instantly with cold water and repeat the process if you feel necessary. Toilet Bowels : Flush toilet to remove water and add 6 ounces of product. Scrub with a bristled brush until clean and flush toilet. Repeat if necessary. Deck: Apply product with a scrub brush or mop. Saturate the surface and let it sit until the wood achieves the desired lightness. Rinse the surface thoroughly with water and allow it to dry. Exterior Surface : For heavy stains apply product full strength. For medium-light stains, mix equal parts of product with water (50/50). Apply directly onto the surface an allow it to sit briefly. Rub lightly with a sponge or brush until the stains are gone. Rinse with water. Heavy stains may require an additional application. NOTE : Keep out from the reach of children. Specification of Krud Kutter Rust, Lime & Calcium Stain Remover Brand Krud Kutter Weight 828 ML Solvents Water Color Light Yellow Odor Mild pH 0.0-1.0 VOC 0% Practical Coverage Varies with typed and porosity of surface Flash Point >200°F (93°C) Safety Information For additional information, see MSDS Technical Data Sheet Click here