Mark Bass Minimark 802N 300 Bass Amplifier Combo

Mark Bass Minimark 802N 300 Bass Amplifier Combo Overview:

The Minimark 802 N300 Combo features the new NANO MARK II head, which offers a myriad of tone shaping options on the go with its complete and effective 4 band EQ controls. Plus, thanks to the included input jack insert (or an optional single footswitch) connected to the dedicated FSW input you can easily have fast access to a scooped-mid EQ setting to get a tight tone for slap or pick bass. And as highly requested, the head is REMOVABLE!

Not only can you use the head separately, you can use the combo's 2x8" cabinet standalone matched with a different head, or as an extension of another combo, or even together with another 8 ohm cabinet. The two 8" custom woofers and an onboard piezo tweeter give an incredible warm and focused sound - making this combo a brilliant choice for electric bass and also ideal for double bass as well as acoustic bass through its faithful reproduction of acoustic instruments!

KEY POINTS

• Removable head amp: The practical design of the Minimark 802 N300 allows musicians to easily remove the ultracompact NANO MARK II amp head and use it separately. This is one of the most requested features from combo users. Of course it is also possible to use also the 2x8" cabinet standalone, matched with another amp, as extension of a combo, or with another 8 ohm cabinet.
\n
• Complete and effective controls: The separate Gain and Master controls allow you to optimize the input level setting and the master volume as needed, and thanks to the simple and effective 4-band EQ controls you can get a clear, loud, defined EQ resulting in an authentic reproduction of your bass guitar's sound. Scooped-mid EQ ideal for slap and pick bass tones are available using the included input jack insert or an optional single footswitch connected to the dedicated FSW input, to have access to the two EQ tones while playing.
\n
• Power-to-weight ratio / ultra-portable amp: The Minimark 802 N300 weighing only 28 lbs / 12.7 kg and has an unbelievable power-to-weight ratio and the rich and warm tones unique to Markbass. It cranks out 150W of power on its own (300W when used with an extension cab) and its full range - with plenty of bottom end - is unrivalled.
\n
• Wide frequency response: Despite its small size, the two 8" speakers efficiently reproduces a wide range of frequencies, even with five and six strings basses.
• Also ideal for double bass and acoustic bass: The sound of acoustic instruments like double bass and acoustic bass is faithfully reproduced by the 2x8” woofers.
• Bi-band limiter: Our new bi-band limiter responds faster and more dynamically to your playing than traditional limiters do and lets your high end "breathe" for a more natural sound. It makes our amp heads the best choice for anyone who enjoys a quick, punchy attack at high volumes.
• MPT - MARK PROPRIETARY TECHNOLOGY: Many other bass amps on the market use power amps that are not specifically designed for bass. At Markbass, Marco De Virgiliis invested heavily in R&D to develop a proprietary power amp technology in house. When compared against the competition, all Markbass amps feel unique, with a more defined sound and more power. Our MPTpower amp was built from the ground up to respect and elevate the inherent tone of your instrument.

Technical Features

• SPEAKER: 2 x 8″
• TWEETER: Piezo
• SPEAKER POWER HANDLING /IMPEDANCE: 400W RMS (AES Standard) / 8ohm
• BASS PORT: Bass Port
• CONTROLS/EQ:
• Gain / Master
• LOW, MID/LOW, MID/HIGH, HIGH
• AMP OUTPUT POWER: 300W @ 4 ohm / 150W @ 8 ohm
• PREAMP: Solid State
• CROSSOVER FREQUENCY: 3.5 kHz
• FREQUENCY RESPONCE: 53Hz to 18KHz
• SENSITIVITY DB SPL: 99
• OTHERS:
• XLR Line Out with Pre/Post EQ and GND Lift switches
• BI-BAND LIMITER
• FX Send/Return
• OPTIONAL FOOTSWITCH: flat/scooped MID/FSW EQ
• DIMENSIONS: 11.14” / 28.3 cm (w); 20.08”/ 51cm (h); 14.45”/ 36.7 cm(d)
• WEIGHT: 28 lbs / 12.7 kg

Specifications:
Speaker: 2x8''
Power handling: 400w rms (aes standard) / 8ohm
Power amp: 300w@4ohm/150w@8ohm
Impedance: 4ohm minimum