Rust-Oleum Nano Shield Advanced Floor Finish

Nano Shield Advanced Floor Finish is a water-based self-cross linking copolymer resin system, enhanced with nano particles of aluminum oxide, providing durable interior clear finish that is ideal for coating and protecting hardwood floors and other interior wood surfaces. Nano Shield Advanced Floor Finish flows and levels exceptionally well on any wood surface. Nano Shield Advanced Floor Finish dries clear and is non-yellowing which makes it ideal for maintaining the true natural color of wood.

Nano Shield Advanced Floor Finish is recommended for use on residential wood floors: kitchens, living rooms, bedrooms, family rooms and entryways. It is also recommended for use on commercial wood floors to include retail stores, shopping centers, offices, restaurants, churches, classrooms, hotels, etc.

It is not allowed to send this item through air mode. Surface mode is enabled for the same. Thus, shipping will be done through surface.

Note - When immediate heavy use of floor is required, use of Nano Shield Hardener is recommended. Nano Shield Hardener will speed up the effective cure time from 10 days to 4 days.

Features of Nano Shield Advanced Floor Finish

• Catalyzed performance without the catalyst
• Nano-size Aluminum Oxide particles fused into the resin for maximum scuff and scratch resistance
• Excellent wear and chemical resistance
• Excellent flow and leveling
• Crystal clear water-based formula
• Available in gloss, semi-gloss, satin and matte sheens
• 275 VOC compliant nationwide

How to Apply Nano Shield Advanced Floor Finish

Surface Preparation

For best results, use at temperatures above 60°F (16°C) and 80°F (27°C). To ensure proper adhesion, surfaces must be clean, dry, free from old finish, wax, grease and dust. For best results, follow NWFA Approved Sanding procedures. Remove all sanding dust with a vacuum and wipe clean with a lint-free cloth lightly dampened with water. Allow to dry thoroughly.

Application

Extinguish all flames and pilot lights, and turn off all stoves, heaters, electric motors and other sources of ignition during use until project is complete. Use only when air (ambient) temperature is between 60-80°F (16-27°C) and the relative humidity is below 85%. Lower temperatures and/or high humidity may cause slower dry times. Slower dry may also result from applications on redwood, cedar or woods with high oil content, or when applied over some stains. Use full strength. Do not thin. Stir thoroughly before and during use. To prevent bubbles in the finish, DO NOT SHAKE. Do not over-brush, and do not apply with a roller.

Properties of Nano Shield Advanced Floor Finish

Surface Preparation For best results, use at temperatures above 60°F (16°C) and 80°F (27°C). To ensure proper adhesion, surfaces must be clean, dry, free from old finish, wax, grease and dust. For best results, follow NWFA Approved Sanding procedures. Remove all sanding dust with a vacuum and wipe clean with a lint-free cloth lightly dampened with water. Allow to dry thoroughly. Application Extinguish all flames and pilot lights, and turn off all stoves, heaters, electric motors and other sources of ignition during use until project is complete. Use only when air (ambient) temperature is between 60-80°F (16-27°C) and the relative humidity is below 85%. Lower temperatures and/or high humidity may cause slower dry times. Slower dry may also result from applications on redwood, cedar or woods with high oil content, or when applied over some stains. Use full strength. Do not thin. Stir thoroughly before and during use. To prevent bubbles in the finish, DO NOT SHAKE . Do not over-brush, and do not apply with a roller. Properties of Nano Shield Advanced Floor Finish Brand Nano Shield Manufacturer Rust-Oleum Physical Properties ADVANCED FLOOR FINISH Resin Type Water-based Polyurethane Pigment Type Nano-sized Aluminum Oxide Solvents Glycol Ethers and Water Weight 3.78 Ltr. Volatile Organic Compounds <275 g/l (2.30 lbs./gal.) Recommended Dry Film Thickness (DFT) per Coat 1.0 mil (25µ) Dry Times at 70-80°F (21-27°C) and 50% RH 1 hour to Touch 2-3 hours to Re-Coat 24 hours to Light Traffic 72 hours to Normal Wear Shelf Life 3 years (unopened) Flash Point >200°F (93°C) Storage Store at room temperature. KEEP FROM FREEZING. Safety Information For additional information, see MSDS Technical Data Sheet Click here