Rust-Oleum Moly Chain Lubricant Spray - 312 Grams

Rust-Oleum Moly Chain Lubricant Spray reduces the friction and offers long lasting lubrication to metal moving parts such as chain drive, bushings, and pins. It clings to moving parts while penetrating the close tolerances to deliver worry-free lubrication. This chain lubricant is designed to stay in place during countless cycles and prevents rust and friction.

NOTE: It is not allowed to send this item through air mode. Surface mode is enabled for the same. Thus, shipping will be done through surface.

Features of Moly Chain Lubricant Spray

• High cling formula which provides great adhesion.
• Convenient aerosol with 360° spray tip.
• High lubricity (less friction, lasts longer).
• Works under high and low temperature.

NOTE: Read the technical data sheet (TDS) for best results.

How to Use Rust-Oleum Moly Chain Lubricant Spray?

Use in a well ventilated area when temperatures are between 50-90ºF (10-32ºC). Avoid spraying in very windy and dusty conditions. Shake well before and during use. Hold can 10-16” from the surface and spray in a steady back-and-forth motion and apply an even, uniform film on all metal surfaces requiring lubrication. Repeat as necessary. Do not apply to painted surfaces, plastic, or parts made of rubber.

Precaution: Vapors may ignite explosively. Keep away from heat, sparks and flame. Extinguish all flames and pilot lights, heaters, electric motors and other sources of ignition during use and until all vapors are gone. Prevent buildup of vapors by opening all windows and doors to achieve cross ventilation. Avoid contact with eyes and skin.

Properties of Rust-Oleum Moly Chain Lubricant Spray

Use in a well ventilated area when temperatures are between 50-90ºF (10-32ºC). Avoid spraying in very windy and dusty conditions. Shake well before and during use. Hold can 10-16” from the surface and spray in a steady back-and-forth motion and apply an even, uniform film on all metal surfaces requiring lubrication. Repeat as necessary. Do not apply to painted surfaces, plastic, or parts made of rubber. Precaution: Vapors may ignite explosively. Keep away from heat, sparks and flame. Extinguish all flames and pilot lights, heaters, electric motors and other sources of ignition during use and until all vapors are gone. Prevent buildup of vapors by opening all windows and doors to achieve cross ventilation. Avoid contact with eyes and skin. Properties of Rust-Oleum Moly Chain Lubricant Spray Brand Lubricants and Cleaners Manufacturer Rust-Oleum Weight 312 Grams Composition Naphthenic Oil Solvent Aromatic Hydrocarbons, Hexane, Petroleum Oils Shelf Life 5 Years Flash Point -156°F (-104°C) Safety Information For additional information, see SDS Technical Data Sheet Click here