Bellinzoni Idea XC Wet Look Stone Sealer

Bellinzoni Idea XC Stone Sealer is manufactured for polished and non-polished stones both. It serves wet look to the surface and provides optimum protection from water & oily substances. It doesn’t form a plastic like film around the stone to protect and let the surface breath, which means that it doesn’t alter the feel of stone. This stone sealer can be used for marble, granite, terrazzo, marble resin, calcareous stones, and more. It also resists UV rays, does not allow mildew and salt efflorescence to form.

NOTE: It is not allowed to send this item through air mode. Surface mode is enabled for the same. Thus, shipping will be done through surface.

Features of Ideal HP Wet Look Stone Sealer

• Gives wet look to the surface.
• Keeps the feel of stones.
• Coverage approximately 15-30 sqm (polished marble and granite).
• Suitable for polished and non-polished stones.

NOTE:Clean and dry the surface before applying.

How to Use Bellinzoni Idea XC Wet Look Stone Sealer?

Surface must be clean and dry other wise it will be harder to remove stains after application. Application can be done by brush, by roller or by spray gun. It is suggested, when possible, to apply the product by brush because it allow the product to penetrate well into the stone. Application of Idea XC by brush, making pressure, will facilitate penetration into frames and cavities. It is also possible to apply the product buy airless spray gun. In this case, fill the tank with the product and spray at the distance of 20-25 cm. Let the product dry naturally and the stone will be protected. In case excess of product, the same can be removed using a cloth impregnated with Ideal XC.

Instructions for Using Bellinzoni Idea XC Wet Look Stone Sealer

• It is suggested to apply the product will complete saturation of the stone.
• On very absorbent material it is better to make a second application after one hour from the first.
• Dont dilute the product with any solvent or water, formulation is ready to use.
• Material, before treatment, has to be completely dry.
• For small pieces of stone, it is possible to apply the product by immersion, it is also possible to use a sponge completely damped with Ideal XC and apply it evenly on the surface.
• Once the material has been treated it is necessary to wait 24 hours for complete polymerization.
• In case of treatment of statues, decorations etc. pay attention to protect well cavities and corners.
• Read carefully recommendations printed on the tin before use.

Properties of Bellinzoni Idea XC Wet Look Stone Sealer

Surface must be clean and dry other wise it will be harder to remove stains after application. Application can be done by brush, by roller or by spray gun. It is suggested, when possible, to apply the product by brush because it allow the product to penetrate well into the stone. Application of Idea XC by brush, making pressure, will facilitate penetration into frames and cavities. It is also possible to apply the product buy airless spray gun. In this case, fill the tank with the product and spray at the distance of 20-25 cm. Let the product dry naturally and the stone will be protected. In case excess of product, the same can be removed using a cloth impregnated with Ideal XC. Instructions for Using Bellinzoni Idea XC Wet Look Stone Sealer It is suggested to apply the product will complete saturation of the stone. On very absorbent material it is better to make a second application after one hour from the first. Dont dilute the product with any solvent or water, formulation is ready to use. Material, before treatment, has to be completely dry. For small pieces of stone, it is possible to apply the product by immersion, it is also possible to use a sponge completely damped with Ideal XC and apply it evenly on the surface. Once the material has been treated it is necessary to wait 24 hours for complete polymerization. In case of treatment of statues, decorations etc. pay attention to protect well cavities and corners. Read carefully recommendations printed on the tin before use. Properties of Bellinzoni Idea XC Wet Look Stone Sealer Brand Bellinzoni Manufacturer Bellinzoni Appearance Liquid Color Transparent Oder Characteristic Weight 1 Ltr Specific gravity at 20°C 0,860 ± 0,02 Hydro-solubility Non-Soluble pH NA Drying Time at 20°C 20-30 Minutes Shelf Life at 20° 12 Months in Original Packing For more information See Technical Data Sheet