Rust-Oleum Zinsser Perma-White Mold & Mildew-Proof Exterior Paint

Enhance and protect moisture-prone areas on your home or business with Rust-Oleum Zinsser PERMA-WHITE Mold & Mildew-Proof Exterior Paint. This high-performance, self-priming coating is tintable to popular mid/light tones.

NOTE: It is not allowed to send this item through air mode. Surface mode is enabled for the same. Thus, shipping will be done through surface.

Features of the Product

• Mold & Mildew-Proof paint film - guaranteed for 5 years.
• Durable, long lasting finish - guaranteed for 15 years.
• Self-Priming - sticks to surfaces without sanding.
• Fade Resistant.
• Resists dirt and moisture.
• Tintable to any off-white, pastel or medium earthtone color.

How to Apply Zinsser Perma-White Mold & Mildew-Proof Exterior Paint

Surface Preparation

Surfaces should be clean, dry, sound and free of dust, dirt, excessive chalky material, grime, grease, oil, wax, mildew, wallpaper adhesive, or any contamination that may interfere with adhesion. If unsure of cleanliness, always wash surface with household ammonia and water solution, appropriate cleaning solution or solvent (do not use TSP as a cleaner). Remove any peeling and/or unsound coatings. Sand any remaining paint film edges smooth. Remove existing stains by washing, sanding, scraping, etc. Countersink exposed nail heads, spot prime and fill all nail holes and gouges with Ready-Patch® spackling compound or equally suitable material.

Application

Two coats are required for proper performance and mold & mildew-proof resistance. Apply only when air, material, and surface temperatures are between 50-90ºF (10-32ºC) and the relative humidity is below 80%. Thoroughly mix to ensure any settled pigment is re-dispersed before using. Apply with a synthetic (nylon, polyester or blend) bristle brush, roller, pad applicator or airless sprayer. Follow manufacturers instructions when using spray equipment. For airless spraying use a 0.017" tip at 2000 to 2600 psi. Wear NIOSH approved respirator and provide adequate ventilation.

Properties of Zinsser Perma-White Mold & Mildew-Proof Exterior Paint

Surface Preparation Surfaces should be clean, dry, sound and free of dust, dirt, excessive chalky material, grime, grease, oil, wax, mildew, wallpaper adhesive, or any contamination that may interfere with adhesion. If unsure of cleanliness, always wash surface with household ammonia and water solution, appropriate cleaning solution or solvent (do not use TSP as a cleaner). Remove any peeling and/or unsound coatings. Sand any remaining paint film edges smooth. Remove existing stains by washing, sanding, scraping, etc. Countersink exposed nail heads, spot prime and fill all nail holes and gouges with Ready-Patch® spackling compound or equally suitable material. Application Two coats are required for proper performance and mold & mildew-proof resistance. Apply only when air, material, and surface temperatures are between 50-90ºF (10-32ºC) and the relative humidity is below 80%. Thoroughly mix to ensure any settled pigment is re-dispersed before using. Apply with a synthetic (nylon, polyester or blend) bristle brush, roller, pad applicator or airless sprayer. Follow manufacturers instructions when using spray equipment. For airless spraying use a 0.017" tip at 2000 to 2600 psi. Wear NIOSH approved respirator and provide adequate ventilation. Properties of Zinsser Perma-White Mold & Mildew-Proof Exterior Paint Manufacturer Rust-Oleum Zinsser Resin Type Water-based Acrylic Pigment Type Titanium Dioxide, Zinc Oxide Solvents Water, Glycol Ethers Weight 3.78 Ltr. Volatile Organic Compounds <150 g/l (1.25 lbs./gal.) Wet Film to Achieve DFT (Unthinned material) 4.0-5.5 mils (100-137.5µ) Practical Coverage at Recommended DFT Approximately 300-400 sq.ft./gal. (7.4-9.8 m2/l) depending on application method and surface porosity Dry Times at 70-80°F(21-27°C) and 50% RH 30 minuts to Touch 2 hours to Re-Coat 5-7 days to Full Care Shelf Life 5 years Flash Point >200ºF (93ºC) Storage 40-80°F (4-26°C) Safety Information For additional information, see MSDS Technical Data Sheet Click he