Rust-Oleum NeverWet Fabric Durable Water Repellant (NeverWet DWR)

Rust-Oleum NeverWet Durable Water Repellent is crystal clear coating which keeps water away from fabric. This fabric water repellent can be used for polyester, cotton, blends, leather, suede, nylon, wool, denim, velvet, satin, rayon, silk, canvas, and more. It stops the damages which takes place due moisture.

NOTE: It is not allowed to send this item through air mode. Surface mode is enabled for the same. Thus, shipping will be done through surface.

Features of Durable Water Repellent

• Crystal clear coating protects fabrics without changing their colors.
• Easy-to-use.
• Stops water damages.
• Suitable for interior and exterior environment.

NOTE: Application via spray is recommended for best result. NeverWet Fabric Water Repellent Spray is also available.

Featured Video of NeverWet Fabric Durable Water Repellent

How to Apply NeverWet Durable Water Repellent

Suitable Surroundings to Use

Use outdoors or in a well ventilated area. Use when temperature is above 50ºF (10ºC) and humidity is below 85% to ensure proper drying. Avoid spraying in very windy and dusty conditions.

Applpication

Surfaces must be clean and dry. Prior to applying material, test on the fabric in an inconspicuous area for colorfastness. NeverWet Fabric DWR may enrich lighter colored fabric with a slightly darker tone. Pour into a general purpose, hand-held sprayer that sprays an average droplet size of 100 microns (semi-fine mist). For larger applications a standard garden sprayer set to a semi-fine mist may also be used. For OEM applications, air atomized spray or airless spray may be used. Follow the guidelines below. Odorless when dry. Apply coating on the surface until wet. Do not soak or allow to puddle. NOTE: If bubbles appear, lightly dab with a clean, lint-free rag. Re-apply seasonally or when needed. Do not use near open flame.

Properties of NeverWet DWR Fabric Water Repellent

Suitable Surroundings to Use Use outdoors or in a well ventilated area. Use when temperature is above 50ºF (10ºC) and humidity is below 85% to ensure proper drying. Avoid spraying in very windy and dusty conditions. Applpication Surfaces must be clean and dry. Prior to applying material, test on the fabric in an inconspicuous area for colorfastness. NeverWet Fabric DWR may enrich lighter colored fabric with a slightly darker tone. Pour into a general purpose, hand-held sprayer that sprays an average droplet size of 100 microns (semi-fine mist). For larger applications a standard garden sprayer set to a semi-fine mist may also be used. For OEM applications, air atomized spray or airless spray may be used. Follow the guidelines below. Odorless when dry. Apply coating on the surface until wet. Do not soak or allow to puddle. NOTE: If bubbles appear, lightly dab with a clean, lint-free rag. Re-apply seasonally or when needed. Do not use near open flame. Properties of NeverWet DWR Fabric Water Repellent Brand NeverWet Manufacturer Rust-Oleum Composition Proprietary Pigment Type NA Solvents Mineral Spirits Weight 3.78 Ltr. Volatile Organic Compounds Compliant nationwide Practical Coverage at Recommended DFT (assume 15% material loss) Up to 375 sq.ft./gal. Varies depending on fabric Recommended Dry Film Thickness (DFT) per Coat Varies depending on fabric Wet Film to Achieve DFT (unthinned material) Apply material until a wet, sag free film is evident Practical Coverage at Recommended DFT (assumes 15% material loss) Up to 375 sq.ft./gal. Varies depending on fabric Dry Times at 70-80°F (21-27°C) and 50% RH Varies depending on fabric to Touch Varies depending on fabric to Handle 4-8 hours to Fully Dry Shelf Life 2 years Flash Point 114°F (45°C) Safety Information For additional information, see MSDS Technical Data Sheet Click here